Why the printer print extra blank labels after printing?

Printing Issue

A. Please check the “Type” of the Media Settings; choose “Label with Gaps”

B. 1. Please check if the page size set in the driver matched the size of the labels that using in the printer.


Control Panel > Devices and Printers > Right click on NT-LP110A > Printer Preferences > Page Setup
for the printer(If you are using 4×6 paper, please select the 100*150mm)


If you print a 4×6 size page. In the print dialogue, please be sure to select your “Paper Size” appropriately (for example 4 x 6).

The size of loaded paper is smaller than the label file’s(For example, when printing the 100*190mm file but using the 4×6 (100*150) size paper).

For this situation, you can adjust the scales, margins in the page setup in the using browser.


set the scales and margin in printing preview

IE browser:

click the ‘file’ —> ‘page setup’ and adjust the margin


Click the ‘file’—> ‘page setup’ and you can set the scales and margins.

If you are printing from ‘Adobe Reader XI’, please don’t select the ‘Choose paper source by PDF page size’.

Older Post Newer Post

Liquid error (layout/theme line 125): Could not find asset snippets/th-product-review.liquid