NT-LP110A Label Printer Setup Guide — Printing Issue

Why my label is printing sideways?

Printing Issue

A. The most likely reason is that your label is not properly formatted for 4 x 6 label printing.NT-LP110A prints what you see on your screen in the same orientation. So if the label looks side-ways on your screen or if it has a lot of white space around the label, the printer will print it side-ways with the same amount of white space.If your label is 4 x 6 but just provided sideways, you can setup to rotate automatically: On Mac During the print prompt, select your label size under Presets, then navigate to Printer Features -> Page Options...

Read more →


Why the printer’s button is flashing?

Printing Issue

A. Red light is an indication that NT-LP110A has a problem with your label. Most likely, the printer needs to re-identify your label. Please ensure there are multiple labels available to the printer and then run the automatic label identification. Simply press and hold the top button on NT-LP110A until you hear one beep. The printer will then feed labels back and forth to learn the gap and other properties of your labels. If automatic label identification does not work or red light remain, please turn off the printer by using the power switch on the back and turn the...

Read more →


Why the label is getting stuck or half-printed?

Printing Issue

A. NT-LP110A prints by heating the print head. If the label is stuck (generally appears in very dark things like bar codes or thick straight lines), it is most likely because you set a too high print density for the label. This would cause the label to become too hot and stick on the print head. This is because various tags react differently to the same heat. You can set the print speed to “4” and the density to “2”, and then try printing again. If your label is too shallow now, increase the density by 1. If the effect...

Read more →


Why the printer print extra blank labels after printing?

Printing Issue

A. Please check the “Type” of the Media Settings; choose “Label with Gaps”B. 1. Please check if the page size set in the driver matched the size of the labels that using in the printer. Windows: Control Panel > Devices and Printers > Right click on NT-LP110A > Printer Preferences > Page Setupfor the printer(If you are using 4×6 paper, please select the 100*150mm)MacOS: If you print a 4×6 size page. In the print dialogue, please be sure to select your “Paper Size” appropriately (for example 4 x 6).The size of loaded paper is smaller than the label file’s(For example,...

Read more →


Why the printer is skipping labels or continuously feeding?

Printing Issue

The main reasons for this problem are the following. This behavior is usually after you change your label type, size, or manufacturer. A. NT-LP110A hasn’t recognize your label details [This is the most common reason] Please re-run the automatic label identification so the printer can recognize your label.How to make label identification Hold down the button on the top and release it after hearing one “Beep” To ensure that your device did not send any print instruction to the NT-LP110A, please disconnect the USB cable, and then keep pressing the button on the top and release it after you heard...

Read more →